1. Electrically adjustable bed
To neutralize and transform radiation from an electrically adjustable bottom, a combination of the Penta Power Quatro Tag, the Penta Power Gold Tag and Penta Power 220 Tag is the only adequate solution.
- Glue the Penta Power Quatro Tags to the bed frame. The set consists of
four Tags to be glued in the four corners, either all at the bottom or all at the top.
The Tags adhere easily to treated wood, metal or plastic. If your bed is covered with fabric or (imitation) leather, a drop of liquid glue can work wonders.
- The Penta Power Gold Tag can be placed on the nightstand, under the pillow, under the mattress or on the floor.
- Provide
each motor under the bed base
with a
Penta Power 220 Tag
. If this is not possible, stick a Penta Power 220 Tag on the back of the wired remote control or on the bed base itself. Below see the 3 possibilities:
2. Waterbed
To neutralize and transform radiation from a waterbed, a combination of the Penta Power Quatro Tag, the Penta Power Gold Tag and Penta Power 220 Tag is a very efficient solution.
- Stick the Penta Power Quatro Tags on the bed frame. The set consists of four Tags to be glued in the four corners, either all at the bottom or all at the top. Tags adhere easily to treated wood, metal or plastic. If your bed is covered with fabric or (imitation) leather, a drop of liquid glue can work wonders.
- The Penta Power Gold Tag can be placed on the nightstand, under the pillow, under the mattress or on the floor.
- For
protection from radiation from the heating elements
of the waterbed, it is recommended to use a
Penta Power 220 Tag
attached:
- Stick a Penta Power 220 Tag on the back of the wired remote control.
- With a
wireless remote control
are a Penta Power 220 Tag on the side of the bed and a
Penta Power Multi Tag
attached to the remote control.
Want to know more about a waterbed or bed with electric controls as a radiation source? Click here.
